SJX 2470 Jet Boat


The SJX2470 Jet Boat is a longer version of our most popular model. It provides the nimbleness of a smaller lightweight boat with the versatility of a cargo boat with its hauling capabilities. The SJX2470 is the jet boat that will give you more boat for additional cargo or passengers, and still get you where you need to go.

Aluminum Hull-The Foundation On Which We Build

5052-H32 Alloy Temper used for most construction except where specified. All floors and deck hatch lids coated with bed-liner material also with sound deadening insulation. Zero aluminum to aluminum contact between boat subfloor and flooring! Triple bulkhead cross floor construction, 34 cross floor braces @ 16-inch centers, .125″ (1/8″) thick channels 6063-T6 Alloy Temper, bulkhead plates .166″ (3/16″) thickness.

  • 24 ft. Boat, 70-inch bottom width, .125" (1/8") bottom thickness
  • 27-inch sides, .125" (1/8") thickness
  • Transom thickness of .160" (4/25")
  • Intake thickness of.250" (1/4")
  • Aluminum Floors are .125" (1/8") thickness.
  • Bow decks are .160" (4/25") thickness.
  • Center Hull Stiffener "C" Channel full-length 6063-T6 Alloy .190" (3/16") thickness
  • "Box runners" are .125" (1/8") thickness.
  • 6 full-length standard hull stiffeners (2" channels), 6063-T6 Alloy .125" (1/8")

    • Engine & Jet Drive

  • Engine; Indmar 310 hp Eco-Boost™ 2.3 Liter, Fuel Injected, Turbo Charged.
  • Marine XHD Deep Cycle Interstate™ battery.
  • 40-gallon Aluminum fuel tank**
  • Jet Drive; EcoJet with stainless steel impeller.
  • Indmar engines are equipped with an onboard fuel water separator.
  • Stainless Steel 9 bar EZ-Clean Jet Intake Cleanout System.
  • Top cleanout port accessible through swim deck.
    • *Indmar engines are equipped with an additional onboard fuel water separator "dual protection").**2013 EPA approved closed fuel system, dual anti-siphon ventilation, and splash tray fill.

    Instrumentation, Controls, & Hardware

  • Custom "SJX" instrument and switch panel.
  • VeeThree EGM  digital multi-function Instrument Package.
  • All applicable deck hardware.
  • Complete 500 GPH Bilge system
  • 4 inch Blower and welded aluminum cowl vent system**
  • Single lever control shift/throttle combo with neutral safety switch.
  • Lanyard tether kill switch.
    • **4-inch Blower and welded aluminum cowl vent system to accommodate NEW USCG ventilation regulations and standards.

    Exclusive Extrusions (Designed By SJX For SJX)

  • Outer 1 1/2″ Handrail/gunwale, 6063-T6 Alloy Temper.
  • Inner 1″ Handrail, 6063-T6 Alloy Temper.
  • Center Hull Stiffener "C" Channel.
  • Outer Receiver Hitch Socket 2″ square tubing, .250″ (1/4″) thickness, 6063-T6 Alloy Temper.
  • Inner Receiver Hitch Socket Insert square tubing, .500″ (1/2″) wall thickness, 6063-T6 Alloy Temper.
  • Heater line tubing, 3/4″ OD, .125″ (1/8″) wall thickness, 6063-T6 Alloy Temper.
  • Deck Hatch Framing Channel, .125″ (1/8″) thickness, 6063-T6 Alloy Temper.

    • THE SJX2470 CONSOLE

    Dual Console assembly, 3-piece windshield with center walk-thru, upper and lower console doors for easy access, passenger side glove compartment, storage step box, .125" (1/8") thickness, 5052-H32 Alloy Temper, solid bulkhead type construction yet still removable. "Zero Flex".

    SJX2470 EXTERIOR & INTERIOR COLOR OPTIONS

    The entire "Exterior" is wrapped with our standard high-definition vinyl wrap. We have found our wraps are more durable than an old-fashioned paint job and they look better. Our wraps are a quantum leap forward.

    Entire "Interior" bed-liner coating with color choices. A nice feature about our bed-liners is you can purchase one of our bed liner kits and do a repair at your home or shop.

    SJX2470 BOAT INTERIOR FEATURES

  • Raised rear deck over fuel tank, storage compartments on sides of engine compartment.
  •  Step-up front deck.
  •  Large bow hatch with hinging lockable lid with storage.
  •  Aluminum seat/storage boxes, hinging lid, with custom folding and swiveling seats (color choices).

    • SJX2470 BOAT ADDITIONS

  • Welded transom eyes, .375" 3/8" thickness, 6063-T6 Alloy Temper.
  • Welded bow eye, .375" 3/8" thickness, 6063-T6 Alloy Temper.
  • Weld-on transducer brackets for fish and depth finders.
  • Weld-on zinc plate brackets.
  • Swim deck/Jet guard.

    • How can we help?

    * Indicates a required field

    1. Woody Smith Ford

      535 S. Yellowstone Highway
      Rexburg, ID 83440

      • Sales: 208-356-3636
    Loading Map...

    Get in Touch

    • Contact our Sales Department at: 208-356-3636
    • Monday9am-7pm
    • Tuesday9am-7pm
    • Wednesday9am-7pm
    • Thursday9am-7pm
    • Friday9am-7pm
    • Saturday9am-6pm
    • SundayClosed